Although ear wax exists to protect your ears from water and irritants, itcan build up and require removal methods. And an excess of ear wax canead to a number of uncomfortable and downright painful problems, Wesell ear wax removal Kits for just this situation, This Kit is generally safefor home use, but follow up with your doctor or audiologist if you wear ahearing aid or if the kit fails to remove all of the wax.


1. Do not use this tool if you have an active ear infection, ruptured eardrum (tympanic membranes) or tympanic tubes, irritation, rash orredness.
2. Only use lukewarm water for irrigation. Use of hot or cold water cancause dizziness,vertigo ornausea.
3.The individual must remain seated and in an upright position with headheld straight while cleansing their ears with this Earwax RemovaSystem.
4. Discontinue use immediately if bleeding, irritation, or any traumaoccurs.
5. Discontinue use immediately and seek medical care whenever youfeel pain during use.
1. Attach the disposable cleaning tip into the luer lock adapter at the endfor the hose.
2. Test the system by spraying into a sink.
3,Drape a clean towelacross the shoulders to prevent wetness.
4. Place the collection basin under the ear to be irrigated to collectdraining water.
5. Carefully insert the clear cleaning tip the canal and pump slowly. lf thelength is too long, you can down the cleaning tip to a length that isacceptable. There should be slight pressure, but no pain.
6. Move the tip around in different directions to loosen up blocked wax.lmpacted wax may not loosen immediately. Repeat process asneeded.
7.Use the ear bulb to remove excess waterleft in the ear.
8. Dispose of dirty drainage water in a sink or toilet.
9. Unscrew the cleaning tip and discard. Cleaning tips are for one timeuse only.
10.Wash the bottle pump, tubing an basin and air dry. Store in a cleanplace. You can clean with mild disinfectant or 1 to 1 mix of whitevinegar and warm water.
After using, remove and dispose of the cleaning tip; Wash bottle, pumpand tubes with a mild disfinfectant; A good cleaning solution can bemade with a 1 to 1 mix of white vinegar and water, Make sure to pumpcleaner through the nozzle and tubing. Finally let all the parts drycompletely before putting away.